Synergy+ Automatic Heat Detector
- Auto Detection System
- Totally wire free operation
- Mesh Radio connectivity
- 2Km line of sight range
Product Documents
Synergy+ Automatic Heat Detector – Reliable Automatic Detection for Controlled Environments
The Synergy+ Automatic Heat Detector is a reliable automatic detection unit from Evacuator Alarms. It is designed to monitor changes in room temperature and trigger linked non-detector Synergy+ devices when a preset threshold is reached. As a result, it provides dependable activation without relying on smoke detection.
Because some environments naturally contain smoke, dust, mist, or controlled fire, the Synergy+ Heat Detector helps prevent accidental system activation. Therefore, it is ideally suited to kitchens, workshops, plant rooms, and similar indoor locations.
Accurate Heat Detection Where Smoke Sensors Are Unsuitable
The device features an Apollo 57-degree heat detection head, which responds to significant temperature changes rather than airborne particles. Consequently, it delivers consistent detection in areas where traditional smoke detectors may cause false alarms.
Once triggered, the Synergy+ Heat Detector transmits a signal to other connected Synergy+ devices. However, the detector itself does not emit any sound, allowing alert devices elsewhere in the system to activate instead.
Simple Wireless Setup & Everyday Reliability
Installation is quick and straightforward thanks to the unit’s fully wireless design. In addition, three clearly marked buttons on the front of the device allow for easy pairing, testing, and system setup.
Furthermore, mesh radio connectivity and a Category One radio module help maintain reliable communication across the system. An integrated anti-tamper antenna also enhances security and system integrity.
Indoor Use & System Notes
The Synergy+ Heat Detector is designed for indoor use only. It also does not include a built-in sounder or strobe. Instead, it activates other compatible Synergy+ alert devices within the system when heat is detected.
Standards & Best Practice
For guidance on the correct use of heat detection within fire alarm systems, refer to information published by the British Standards Institution (BSI). In particular, standards such as BS 5839 outline best practice for detector selection in environments where smoke detection may not be suitable.
Key Features
- Up to 3 years battery life
- Apollo 57-degree heat detection head
- Category One radio module
- CE, UKCA, ROHS & EMC compliant
- Battery low indication
- Secure reset function
- Totally wire-free operation
- Anti-tamper antenna
- Mesh radio connectivity
- Radio frequency 869MHz
- Up to 2km line-of-sight range
- Status LED indicator
Explore the Synergy+ Range
View the full Synergy+ range here to discover additional wireless detection and alert devices designed for temporary and challenging environments.
Additional information
| Dimensions | H 165 x W 165 x D148mm |
|---|---|
| IP Rating | Indoor Only |
| Power Source | FMCEVAWBPACK4 |
| Product Code | FMCEVASYNP3 |
| Weight | 1.6Kg |
FAQs
- Q: Where should the Synergy+ Automatic Heat Detector be installed?
- A: The Synergy+ Automatic Heat Detector is designed for indoor areas where smoke detection may cause false alarms, such as kitchens, workshops, or plant rooms. It should be mounted on ceilings where temperature changes can be reliably detected.
- Q: How does the Synergy+ Automatic Heat Detector trigger alerts?
- A: The detector monitors changes in room temperature. When a linked threshold is reached, it sends a signal to connected Synergy+ alarm devices. Note that the detector itself does not emit any sound, relying on other system devices to alert personnel.
- Q: What features help maintain reliable wireless performance?
- A: The Synergy+ Automatic Heat Detector uses a Category One radio module and mesh connectivity with an anti-tamper antenna. These features ensure secure, reliable communication with other devices up to 2km line-of-sight, even in demanding indoor environments.
Reviews
There are no reviews yet.