Synergy+ Advanced Relay Interface

The new Synergy+ Advanced Relay Interface is used to trigger other alarm systems using a 869Mhz radio frequency. This is activated when the alarm sounds, it will then close the normally open contact. This output should be used as a zero-volt input. The output is able to trigger a no volt input or an input switching a low voltage such as 5V/24V dc. The input to the Advanced relay enclosure should be a no volt contact. The advanced relay unit will take an input to trigger the Synergy + system from the fixed system and when that input is released it will then send out a radio message to silence the Synergy + system connected. This configuration offers the possibility of silencing the wired and the wireless from either system. This has typically being used when there is a requirement for the temporary Evacuator Synergy + system to be connected to a Fixed alarm system.. It features a built-in sounder emitting a 110dB alarm and flashing LED strobe which simultaneously triggers when activated. The device uses a 4.5v battery which can last up to 3 years (depending on usage) but can be powered by mains using our optional mains conversion kit.

• Up to 3 years Battery Life
• Category One radio module
• CE, UKCA, ROHS & EMC Compliant
• Battery Low indication
• Status LED
• Totally wire free operation
• Mesh Radio connectivity
• Radio Frequency 869Mhz
• Used to trigger other alarm systems
• Volt Free N/O & N/C contacts.